top of page

At AENEC we use AccuRate SustainabilityFirstRate5  and BERS Pro; giving you all available options for NatHERS assessments/certifications to match

the special requirements of any project.

In addition we utilize CAD technology to perform data inputs for the best possible accuracy.

Note: As Energy standards for new homes are set to rise in 2022, we recommend you start considering this options for future projects. See in Link of our blog page.

 

NatHERS

The Nationwide House Energy Rating Scheme (NatHERS)

is a star rating system (out of ten) that rates the energy efficiency of a home, based on its design. By providing a ‘measuring tape’ to estimate a home’s potential heating and cooling energy use, NatHERS helps to make Australian homes more comfortable for their inhabitants and also helps residents to save on energy bills through smarter design choices. Often good design can reduce the amount of energy needed to keep a home comfortable with no or little additional construction cost.

 

A NatHERS star rating depends on how much cooling or heating a 'standard family' (the occupants) may need to stay comfortable during a typical year. NatHERS accredited computer software simulates how heat enters and escapes a house every hour of every day of the year, assuming the occupants open and close windows and any blinds or awnings to make best use of the local climate.

 

NatHERS Explained

Have you ever wondered why some houses are warm in winter when the heater isn’t on? Or how the same house stays cool in summer, without the need for an air-conditioner? The design of your home, from the building materials and layout, to the positioning of windows and shading, affect how well the home responds to the climate where it is located, how comfortable the home is to live in, and the amount of money you spend on heating and cooling. 

All new Australian homes, or those undergoing major renovations, must meet minimum state and territory energy efficiency requirements based on the National Construction Code. The most common way to meet these requirements is by getting a home energy rating done using the Nationwide House Energy Rating Scheme (NatHERS). NatHERS software tools provide homes with a star rating out of ten based on how energy efficient they are—the more stars, the more energy efficient and the more money you save on energy bills.

Using software based on scientific research by the CSIRO, NatHERS estimates how much energy your home will need for heating and cooling by looking at: the layout of the home; the construction of its roof, walls, windows and floor; the orientation of windows and shading to the sun's path and local breezes; and how well these suit the local climate.

A zero star rating means the building shell does practically nothing to reduce the discomfort of hot or cold weather. A six star rating indicates good, but not outstanding, thermal performance, and a 10 star rated home is unlikely to need much, or any, mechanical cooling or heating (from appliances).

Different star ratings: The NatHERS star rating system refers to your home’s construction and design features, and is different to the star rating of appliances. Your fridge, dishwasher, air-conditioner and other household appliances are rated under the Greenhouse and Energy Minimum Standards (GEMS), and are not measured as part of the NatHERS star rating.

How to improve the energy efficiency of your home

A well-designed home should be comfortable all year round and reduce your reliance on mechanical heating and cooling. Passive design, which works with the local climate rather than against it, is one of the most effective and cheapest ways to achieve this.

Passive solar heating takes advantage of the sunlight during the day to warm your home in winter. North-facing windows allow the heat from the sun into the home, while materials with a high thermal mass absorb the heat and release it within your home at night. Good insulation and infiltration sealing will then prevent warm air from escaping.

During the summer months, passive solar cooling will help save on energy costs. Effective shading— such as eaves, pergolas, external blinds or vegetation—can block up to 90 per cent of heat from direct sunlight entering the home. Locating windows on opposite sides of the home and on the sides that capture the common direction of breezes, helps with cross ventilation and cooling the home without the need for air-conditioners. While insulation and appropriate thermal mass for your climate are also essential for keeping your home cool.

Did you know, if your roof or ceiling isn’t insulated you could lose up to 45 per cent of your heating and cooling energy via your roof, while good insulation can save up to 40 per cent in heating and cooling bills.

Even the type of windows you have affect the energy efficiency of your home. They can be a major source of unwanted heat gain (up to 87 per cent) or heat loss (up to 40 per cent).

When choosing windows, you should consider your climate (temperature, humidity, amount of sunshine), building layout and the orientation, size and shading of the windows, and the different types of glass and frames. For example, people living in hot climates may choose tinted glass or low-solar-transmittance/gain (low-e) glass to reduce solar heat gain and locate windows to the south to avoid the sun entering the home, while people in cool climates may choose windows with double or triple glazing, or high-solar-transmittance/gain (also called low-e) glass and face windows north, to allow more heat in.

Even if you aren’t building or renovating, there are things you can do to improve the energy efficiency of your home: 

  • Lights accounts for around 10 per cent of household electricity bills – replace inefficient halogen lighting with LEDs or compact fluorescent lights (CFLs)

  • Replace old showerheads and taps with water efficient options

  • Buy energy efficient appliances with the highest GEMS star rating you can afford

  • Seal gaps around doors, windows and light fittings – leak proofing strips are available at your local hardware store

  • In cooler climates, remove or prune plants blocking north-facing windows from sunlight

  • Reduce lawn areas – plant trees and native vegetation to absorb heat, direct breezes into the home and restore biodiversity

  • Consider installing ceiling fans for better airflow

  • Consider installing a rainwater tank and rooftop solar

Remember, small changes can have a big impact on your bills and help reduce greenhouse gas emissions for a better future.

In NSW, most BASIX Certificates in their thermal comfort section require a NatHERS certification.

 

Why use AENEC?

  • Quality Guaranteed

  • Very Fast Turn Around Times

  • Long Industry Experience

  • Excellent Service

AENEC (Australian Energy Efficiency Consulting) is an Australian owned company servicing the building sustainability industry and BCA compliance since 2009.

Our very varied clients range from small architectural firms, small to large building companies to larger architectural firms and prime building developer companies all the way to one off owner builders.

 

We pride ourselves in using state of the art technology and engineering techniques and our 100% success rate in terms of council submissions.

 

We believe in the importance of providing high quality assessments and recommendations to ensure your projects are done the best way possible.

 

We aim to make developments meet the minimum performance standards by using the most economical in terms of thermal performance materials/components based on the design parameters. When needed, we will recommend adjustments of materials/components in order to achieve the desirable results, for the respective project.

 

 

 

OUR VALUES

 

STAYING ON TREND

AENEC is a well- established and known business in the industry and we are committed to being at the forefront of latest trends and latest developments through membership accreditation and CPD programs.

 

SUSTAINABILITY

AENEC cares about leaving a low environmental footprint and our philosophy is to find technical solutions for each project that are both cost effective and environmentally friendly. Current managing director and partner in life are planting 100's of trees every year.

 

TECHNICAL DETAILS

At AENEC we focus on quality and consistency and we work with the best modelling software packages in the industry; For NatHERS, AccuRate Sustainability and Fine4RATE CAD interface are used. We normally work with DWG and IFC format to extrapolate information to the modelling software for accurate and reliable assessments to the accuracy of 1 millimeter.

FirstRate 5 is also a software that we utilize for out NatHERS assessors based on inquiries.

All of our data is backed-up daily and available to us at any time.

  

CLIENTS

We take pride on our clients as we have interacted with a very wide range of endeavors since September 2009. We have had excellent and ongoing relationship with over half of our current clients and business has been growing at a steady pace of 25% on average per annum. A large proportion of our current dealings arises by new clients that have already had BASIX/NatHERS completed by other consultancy firms.

Ensure that you will have a reliable company on your side all the way until the building is approved and in cases that our skills can be applied until the completion stage, by all means make sure that you contact us.

We are 100% committed to our clients. See for yourself!

Contact us HERE

http://services.abcb.gov.au/NCCOnline/
http://www.absa.net.au
http://www.csiro.au/
https://www.basix.nsw.gov.au/basixcms/
http://www.abcb.gov.au/
http://www.energyinspection.com.au/
bottom of page